Joker Poker displays go dim
3 posters
Page 1 of 1
Joker Poker displays go dim
I've got a Joker Poker that all the ground mods, slam switch mod and battery relocation has been done on. I've had the machine for over five years, and it's been bulletproof...until recently. It has all the original boards.
When I turn the machine on, everything boots up properly. After about thirty seconds, all five displays start flickering slightly, and then gradually go very dim. I checked the voltages with the outputs unhooked, and the 62 volt is at 61, and the 42 is at 43. With everything hooked up, they are at 44 and 25 volts.
Other than that, the machine plays perfectly. I'm not sure where to go from here.
Do you think it's the power supply? I'd like to keep the original main and driver board, rather than go with the Pascal or NiWumph. I wouldn't mind going to the GPE or Rottendog power supply, tho.
Does anyone have a spare working power supply I could try to make sure before I spend $$?
When I turn the machine on, everything boots up properly. After about thirty seconds, all five displays start flickering slightly, and then gradually go very dim. I checked the voltages with the outputs unhooked, and the 62 volt is at 61, and the 42 is at 43. With everything hooked up, they are at 44 and 25 volts.
Other than that, the machine plays perfectly. I'm not sure where to go from here.
Do you think it's the power supply? I'd like to keep the original main and driver board, rather than go with the Pascal or NiWumph. I wouldn't mind going to the GPE or Rottendog power supply, tho.
Does anyone have a spare working power supply I could try to make sure before I spend $$?
Zog- Posts : 18
Join date : 2012-03-23
Re: Joker Poker displays go dim
Probably cheapest to re-built the high voltage section of the power board. I agree though, it would be nice to swap in a known working board to know for sure what it is. Unfortunately I don't have one.
prock- Posts : 720
Join date : 2012-06-30
Location : Winnipeg
Re: Joker Poker displays go dim
i may have one...........i will check my boards this weekend
Malibu-ss- Admin
- Posts : 1552
Join date : 2011-09-29
Location : Winnipeg
Re: Joker Poker displays go dim
sorry for taking so long...I looked through all my spare boards today and do not have one.I could have sworn I did
Malibu-ss- Admin
- Posts : 1552
Join date : 2011-09-29
Location : Winnipeg
Re: Joker Poker displays go dim
Thanks for checking. I think I'll just order a new one.
Zog- Posts : 18
Join date : 2012-03-23
Similar topics
» CPR Joker Poker backglass
» CPR Joker Poker playfields are done
» Wanted Joker Poker Pinball Machine
» New or Used Displays
» New LED color LED displays
» CPR Joker Poker playfields are done
» Wanted Joker Poker Pinball Machine
» New or Used Displays
» New LED color LED displays
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum