DMD - not lighting up
2 posters
Page 1 of 1
DMD - not lighting up
Fired up the stargate after an extended period of time (3-4 months) and the DMD is blank, the last time it was used it was perfect.
I have pulled off the cables and reconnected them, no change.
Any ideas appreciated.
I have pulled off the cables and reconnected them, no change.
Any ideas appreciated.
madmanc- Posts : 18
Join date : 2013-06-04
Re: DMD - not lighting up
Sounds like a fuse to me. If one is bad and it keeps blowing after that there is a bigger issue. If not you'll need to start checking voltages. Could be the DMD so you might want to swap it out and see.
prock- Posts : 720
Join date : 2012-06-30
Location : Winnipeg
Re: DMD - not lighting up
For reference: http://www.pinrepair.com/sys3/
The fuse you need to check is probably F3. Be sure to replace it with a proper spec fuse if it is bad.
The fuse you need to check is probably F3. Be sure to replace it with a proper spec fuse if it is bad.
prock- Posts : 720
Join date : 2012-06-30
Location : Winnipeg
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|